Zanasi USA offers the Z-JET 303.  The Z-Jet 303 STAINLESS STEEL system is the perfect solution to any application requiring one or two DOD print heads. This system is a cost effective option for basic applications and requirements.  Below you will find some features and the components that are included with this system.

Z JET 303 features:

1.    Independent management of up to two 7-dot print heads or one 16-dot print head.

2.    Print heights from 1/4" to 3/4" for 7-dot head.

3.    Print heights from 5/8" to 2 3/8" for 16-dot head.

4.    Automatic date and time, and shift code.

5.    Incremental and decrement counters.

6.    RS232, RS422, and RS485 serial communications.

7.    BCD message editing.

8.    100 message storage per head.

9.    26 logo creation and storage in console.

10.   Separate photocell and encoder ports.

Z-JET 303 System components:

(1)       Z-JET 303 CONSOLE

(1)      NZ PRINT HEAD (  7 DOT )..or...( 16 DOT )

(1, 2)  PRINT HEAD CABLE(S)  { 1 } for 7-dot.....{ 2 } for 16-dot

(1)      INK TANK 1.4 qt. S.S.,   1.5 gal S.S. ,   5 gallon Ink Cap ,  or 2.8 gal stir tank

(1)       PHOTOCELL

(1 kit)  PRINT HEAD BRACKET  ( MOUNTS TO ONE SIDE OF CONVEYOR )

(1)      AIR REGULATORS with AIR FILTER

(1)            MAINTENANCE KIT and MANUAL (English)

*SPECIFY THE AMOUNT AND TYPE OF PRINT HEAD.

    print height(s)   7DOT = 7mm, 13mm, 16mm, 20mm

    print height(s) 16DOT = 16mm, 40mm, 50mm, 60mm

**SPECIFY THE INK TYPE AND SIZE OF THE INK TANK. 

A = ALCOHOL INK ..... M = MEK INK ..... W = WATER-BASE INK